Brother MFC-440CN User Manual page 149

Copying Difficulties
Difficulty
Cannot make a copy.
Vertical streaks appear in copies.
Poor copy results when using the
ADF.
Scanning Difficulties
Difficulty
TWAIN/WIA errors appear while
scanning.
Poor scanning results when using
the ADF.
Software Difficulties
Difficulty
Cannot install software or print.
'Device Busy'
PhotoCapture Center™ Difficulties
Difficulty
Removable Disk does not work
properly.
Cannot access Removable Disk
from Desktop icon.
138
Suggestions
Make sure that the Copy
on page 94.)
If you see vertical streaks on copies, clean the scanner. (See Cleaning the
scanner on page 150.)
Try using the scanner glass. (See Using the scanner glass on page 11.)
Suggestions
Make sure the Brother TWAIN/WIA driver is chosen as the primary source. In
®
PaperPort SE with OCR, click File, Scan and choose the Brother TWAIN/WIA
driver.
Try using the scanner glass. (See Using the scanner glass on page 11.)
Suggestions
Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair
and reinstall the software.
Make sure the machine is not showing an error message on the LCD.
Suggestions
1 Have you installed the Windows
1) Unplug the USB cable.
®
2) Install the Windows
the installation the PC will be automatically restarted.
3) Wait about 1 minute after you restart the PC, and then connect the USB
cable.
2 Take out the memory card and put it back in again.
3 If you have tried 'Eject' from within Windows
before you continue.
4 If an error message appears when you try to eject the memory card, it means
the card is being accessed. Wait a while and then try again.
5 If all of the above do not work, turn off your PC and machine, and then turn
them on again. (You will have to unplug the power cord of the machine to turn
it off.)
Make sure you have put the memory card into the media slot.
key is illuminated. (See Entering Copy mode
®
2000 update? If not, do the following:
2000 update, and see the Quick Setup Guide. After
®
, take out the memory card