Receive Mode Settings; Ring Delay; F/T Ring Time (Fax/Tel Mode Only) - Brother MFC-440CN User Manual

Receive mode settings

Ring Delay

The Ring Delay sets the number of times the
machine rings before it answers in Fax Only
or Fax/Tel mode. If you have external or
extension phones on the same line as the
machine, choose the maximum number of
rings.
(See Connecting an external or extension
telephone on page 62 and Fax Detect on
page 46.)
If toll saver is on, then the ring delay setting
has no effect. See Setting toll saver on
page 75. (MFC-665CW only)
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Setup Receive.
Press OK.
d
Press a or b to choose Ring Delay.
Press OK.
e
(MFC-665CW only)
Press a or b to choose Ring Delay.
Press OK.
f
Press a or b to choose how many
times the line rings before the machine
answers (2-10 for Australia, 1-10 for
New Zealand, 0-10 for some countries).
Press OK.
If you choose 0, the line will not ring at
all.
g
Press Stop/Exit.
F/T Ring Time
6
(Fax/Tel mode only)
If you set the Receive Mode to Fax/Tel, you
6
need to decide how long the machine will
signal you with its special pseudo/double-ring
when you have a voice call. If it's a fax call,
the machine receives the fax.
This pseudo/double-ring happens after the
initial ringing from the phone company. Only
the machine rings and no other phones on the
same line will ring with the special
pseudo/double-ring. However, you can still
answer the call on any telephone.
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Setup Receive.
Press OK.
d
Press a or b to choose
F/T Ring Time.
Press OK.
e
Press a or b to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or 70
seconds for Australia and some
countries, 20, 30, 40 or 55 for
New Zealand).
Press OK.
f
Press Stop/Exit.
Note
Even if the caller hangs up during the
pseudo/double-ringing, the machine will
continue to ring for the set time.
Receiving a Fax
6
45
6