Brother MFC-440CN User Manual page 175

Level1 Level2
LAN Setup Misc.
(MFC-440CN
only)
Factory Reset
(Continued)
TCP/IP(Wired)
LAN
-
(MFC 665CW
only)
The factory settings are shown in Bold with an asterisk.
164
Level3 Options
—
Ethernet
— —
BOOT Method Auto*
Static
RARP
BOOTP
DHCP
[000-255].
IP Address
[000-255].
[000-255].
[000-255]
[000-255].
Subnet Mask
[000-255].
[000-255].
[000-255]
[000-255].
Gateway
[000-255].
[000-255].
[000-255]
Node Name BRN_XXXXXX
WINS Config Auto*
Static
(Primary)
WINS Server
000.000.000.000
(Secondary)
000.000.000.000
DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
APIPA On*
Off
Descriptions
Chooses the Ethernet link
mode.
Restores all network
settings to the factory
default.
Chooses the BOOT
method that best suits
your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway
address.
Enter the Node name.
Chooses the WINS
configuration mode.
Specifies the IP address
of the primary or
secondary server.
Specifies the IP address
of the primary or
secondary server.
Automatically allocates
the IP address from the
link-local address range.
Page
See
Network
User's
Guide on
the
CD-ROM