Transferring Your Faxes Or Fax Journal Report - Brother MFC-440CN User Manual

Transferring your faxes or Fax
Journal report
If the LCD shows:
Unable to Change XX
Unable to Clean XX
Unable to Init. XX
Unable to Print XX
Unable to Scan XX
We recommend transferring your faxes to
another fax machine or to your PC. (See
Transferring faxes to another fax machine or
Transferring faxes to your PC as detailed
below.)
You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See Transferring Fax Journal report
to another fax machine on page 144.)
Note
If there is an error message on the
machine's LCD, after the faxes have been
transferred, disconnect the machine from
the power source for several minutes, and
then reconnect it.
Transferring faxes to another fax
machine
If you have not set up your Station ID (See
Quick Setup Guide.), you cannot enter fax
transfer mode.
a
Press Stop/Exit to interrupt the error
temporarily.
b
Press Menu.
c
Press a or b to choose Service.
Press OK.
d
Press a or b to choose
Data Transfer.
Press OK.
Troubleshooting and Routine Maintenance
e
Press a or b to choose
Fax Transfer.
Press OK.
B
f
Do one of the following:
If the LCD shows No Data, there are
no faxes left in the machine's
memory.
Press Stop/Exit.
Enter the fax number to which faxes
will be forwarded.
g
Press Mono Start.
Transferring faxes to your PC
You can transfer the faxes from your
machine's memory to your PC.
a
Press Stop/Exit to interrupt the error
temporarily.
b
Make sure you have installed MFL-Pro
Suite on your PC, and then turn on PC
FAX Receiving on the PC. (For details
see PC- FAX receiving for Windows
the Software User's Guide on the
CD-ROM.)
c
Make sure you have set PC Fax
Receive on the machine. (See PC Fax
Receive on page 80.)
If faxes are in the machine's memory
when you set up PC Fax Receive the
B
LCD will ask if you want to transfer the
faxes to your PC.
d
Do one of the following:
To transfer all faxes to your PC,
press 1. You will be asked if you want
a backup print.
To exit and leave the faxes in the
memory, press 2.
e
Press Stop/Exit.
B
®
in
143