E. Operation
22
E.4 Basic operating steps
E.4.4 Printing data
Data are printed out via the function key
out is possible.
If data are to be transferred to a protocol printer via the infrared interface, the printer that
is to be used must be activated, see Printer , p. 29.
E.4.5 Saving data
Data are saved either via the function key
functions are only available if saving is possible.
See also Memory , p. 23.
E.4.6 Confirming an error message
If an error occurs, an error message is shown in the display.
To confirm an error message:
Errors which have occurred and have not yet been rectified are shown by a warning
symbol in the header (
Messages for errors which have not yet been rectified can be viewed in the
menu, see Instrument diagnosis , p. 27.
sis
E.4.7 Switching the measuring instrument off
Unsaved readings are lost when the measuring instrument is switched off.
.
- Possibly: The pump starts and the measuring cells are rinsed until the shutoff thresh-
olds (O
> 20%, other parameters < 50ppm) are reached. Rinsing lasts no more than
2
2 minutes.
- The measuring instrument switches off.
Print
Save
.
OK
).
. The function is only available if a print-
or the function field
. The
OK Save input
Error diagno-