TESTO 335 Instruction Manual page 33

1
Sensor protection
2 Select the parameter.
Option:
Reset selected parameter to default value:
3 Set the values
Change
4 Repeat steps 2 and 3 for the other parameters accordingly.
Saving settings:
Displaying actual calibration data/cell status:
Calibrationdata
Options:
To change between the actual calibration data of the individual measuring cells:
, .
To print out the actual calibration data of all measuring cells:
To display the status of the measuring cell as a graphic:
- The status of the measuring cell is checked on every recalibration. Any devia-
tion from the condition on delivery is indicated as a percentage.
70%-threshhold: "Gas cell reading unstable, replace item recommended.",
50%-threshhold: "Replacement gas cell."
The last 25 recalibrations are shown.
To return to the display of the actual calibration data:
.
OK
.
OK
OK Save input OK
.
OK
Deflt
.
F. Configuration
F.2 Sensor settings
.
.
Print
.
Graphic
.
Value
33