Culligan 9" Owner's Manual page 32

01023052
32
1) informAtion
>2) mAnuAl mode
mAnuAl mode
regen now
mAnuAl mode
>regen now
mAnuAl mode
>regen tonite
mAnuAl mode
regen now
mAnuAl mode
bypAss
1) informAtion
>2) mAnuAl mode
softening
dec-00-00 12:34A
NOTE Unplugging the Culligan HE water softener will not affect any of the con-
trol settings (the control must be plugged in for at least 10 minutes). Once
programmed, the settings will be stored indefinitely.
To select a setting, press the CHECK MARK button.
The screen displays the setting (Manual Mode) and
the current value (Regen Now). Press the CHECK
MARK button to change the value.
The screen displays the ">" symbol next to the value,
indicating that the value may be changed.
Press the UP ARROW or DOWN ARROW but-
ton to change the value. The screen displays the new
value. For example, press the DOWN ARROW
button to change the value to Regen Tonite. Press the
DOWN ARROW button again to select the next
available value, Bypass.
To cancel the changed setting and revert to the default
setting, press the CANCEL (X) button. The screen dis-
plays the default setting.
Press the CHECK MARK button to accept the
changed value. If the setting values are displayed, the
">" symbol no longer appears next to the value.
The screen returns to the Main Menu. Press the CAN-
CEL (X) button to return to the HOME screen.
The screen displays the HOME screen.