Culligan 9" Owner's Manual page 34

01023052
34
Function
Screen Display
Button
set dAy
>2
set dAy
>2
set yeAr
>2010
clock type
>12 hr
set hour
>10Am
set minutes
>20
Range Procedure
Set Day
Whenever the displayed value is correct,
press the DOWN ARROW button. The
screen displays the next setting.
If the displayed value is not correct, press
the CHECK MARK button. Press the UP
ARROW button to change the day. The
screen displays the new day (in this exam-
1–30
ple, from 1 to 2). Press the CHECK MARK
button to accept the value and advance to
the next setting, SET YEAR.
Set Year
If the displayed value is not correct, press
the CHECK MARK button. Press the the UP
ARROW button to change the year. The
screen displays the new day (in this exam-
2009–30
ple, leave at the default, 2010). Press the
CHECK MARK button to accept the value
and advance to the next setting, CLOCK
TYPE.
Set Clock Type
If the displayed value is not correct, press
the CHECK MARK button. Press the UP
ARROW or DOWN ARROW button to
change the clock type. The screen displays
12 or 24
the changed setting (in this example, leave
at 12 hour). Press the CHECK MARK but-
ton to accept the value and advance to the
next setting, SET HOUR.
Set Hour
If the displayed value is not correct, press
the CHECK MARK button. Press the UP
ARROW or DOWN ARROW button
to change the hour. The screen displays
12PM–
the changed setting (in this example, from
11AM
12PM to 10AM). Press the CHECK MARK
button to accept the value and advance to
the next setting, SET MINUTE.
Set Minutes
If the displayed value is not correct, press
the CHECK MARK button. Press the UP
ARROW button to change the minutes. The
screen displays the changed setting (in this
0–60
example, from 0 to 20). Press the CHECK
MARK button to accept the value and ad-
vance to the next setting, UNIT TYPE.