Culligan 9" Owner's Manual page 20

01023052
20
Filter
Brine Elbow
Drain Elbow Flow Control
Figure 9. Removing the drain elbow and brine elbow.
Attaching the Cover
Once the drain and brine line is connected re-attach the cover. Refer to the below instructions and
Figure 10 through Figure 12.
1. Insert the two pins on the top of the cover into the two holes on top of the frame; the cover
should be slightly angled. See Figure 10.
2. Rotate the cover downward inserting the two pins on the side of the cover into the two
holes on side of the frame. See Figure 11.
3. Attach the cover fastener onto the control valve. See Figure 12.
Figure 10. Cover
fastener clip.
Figure 11. Reattaching the HE Twin softener cover.
Clips