Table of Contents
Advertisement
Configuration
(Standalone)
Automatic
Programs
Fixed Static
Color
Manual Static
Color
Master/Slave
WELL™ Flex User Manual Rev. 1
Use standalone configuration to operate the product without a DMX controller.
Automatic programs allow for dynamic RGBW color mixing without a DMX controller.
1. Go to the Auto Show main level.
2. Select the desired automatic (Auto 0–4) program.
3. Go to the Speed programming level.
4. Select the desired speed 0–100.
You cannot edit any of the automatic programs (Auto 0–4).
The fixed static color mode allows for preset RGBW color mixing without a DMX controller.
1. Go to the Static main level.
2. Select the Fixed Color programming level.
3. Select the desired color combination. See
The manual static color mode allows for manually customizable RGBW color mixing without a
DMX controller.
1. Go to the Static main level.
2. Select the Manual Color programming level.
3. Select the desired color R, G, B or W.
4. Go to the Value programming option.
5. Select the desired color value 0–255 (0–100%).
6. Repeat for the other colors.
The Master/Slave mode allows a group of WELL™ Flex's (the slaves) to simultaneously
duplicate the output of another WELL™ Flex (the master) without a DMX controller.
1. Set each of the slaves:
a. Go to the Master/Slave Mode main level.
b. Select Slave.
2. Set the master:
a. Go to the Master/Slave Mode main level.
b. Select Master.
c. Select an automatic program as explained in
colors as explained in
·
The master is the one that runs a program whether in automatic programs, fixed
static color or manual static color modes.
·
Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master.
·
The master should be the first product in the daisy chain.
Menu
Map.
Automatic
Fixed Static Color
or
Manual Static
Operation
Programs, or a static mix of
Color.
-13-
Advertisement
Table of Contents
