Table of Contents
Advertisement
Operation
4. O
PERATION
Control Panel
Description
Control
Options
Programming
Zoom
Adjustment
Tilt Adjustment
Procedure
-10-
Button
<ON/OFF>
<MENU>
<ENTER>
<UP>
<DOWN>
You can set the WELL™ Flex starting address in the 001–512 DMX range. This enables control
of up to 51 products in the 10-channel 10Ch personality.
Refer to the
Menu Map
and a variable number of programming levels for each option.
·
To go to the desired main level, press <MENU> repeatedly until the option shows on the
display. Press <ENTER> to select. This will take you to the first programming level for that
option.
·
To select an option or value within the current programming level, press <UP> or <DOWN>
until the option shows on the display. Press <ENTER> to select. In this case, if there is
another programming level, you will see that first option, or you will see the selected value.
·
Press <MENU> repeatedly to exit to the previous main level.
You can manually adjust the zoom angle of the WELL™ Flex by adjusting the knob on the back
of the head. Turning the knob clockwise will narrow the beam while turning the knob counter
clockwise will widen the beam.
The head of the WELL™ Flex can be manually adjusted up to 220°.
220°
Press and hold to turn product on or off
Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected
value in to the current function
Navigates upward through the menu list or increases the numeric
value when in a function
Navigates downward through the menu list or decreases the numeric
value when in a function
to understand the menu options. The menu map shows the main level
Function
Zoom
Adjustment
22° to 31°
WELL™ Flex User Manual Rev. 1
Advertisement
Table of Contents
