Refuse Call; Save Data; Second Call - Tenovis TS 13 Operating Instructions Manual

When in doubt, look it up
Menu items on the display

Refuse call

You do not want to accept a second call during a conversation accept. The
caller then hears the busy signal.
Remote no. display -
Remote number display: You can determine whether your call number is to
be shown to the other parties. This function must be enabled by the Ten-
ovis Service.
Return
Back to the last display.
Ringing 1...8
Adjusting the ringing tone volume.
S

Save data

You can determine whether your data is to be stored in
a permanent memory.
Save data immediately
You can store "immediately" at any time.
Please note: If you pull the plug of your telephone while saving data, the
software can be damaged!
Save data centrally immediately -
You can "immediately" store your data in the system. First enter your PIN.
Your telephone is not ready for use while storing.
Save data centrally Free / Barred
The TENOVIS Service can centrally store or play back your personal tele-
phone data. This can be avoided by blocking the central data saving.

Second call

In the "Telephone settings" menu, deactivate the Second call function (only
in idle position), if you do not want to be disturbed by additional calls. Any
calls received are entered in the call list.
You can also deactivate Second call during a connection, either via the
menu or a function key.
• Functions which are labelled with - are not installed as standard on your phone.
92
i