Phone Settings - Tenovis TS 13 Operating Instructions Manual

Menu items on the display
P
Parity AT
You can set the Baud rate of your telephone for data transfer here. The
settings "None", "Even" and "Uneven" are available.
The menu item is only displayed when the AEI mode of operation is set to
"AT command".
Partner -
You can activate a signal for calls to a partner and pick them up on your
telephone.
Partner div. on/off -
Partner diversion: You can divert calls from one telephone to another within
your partner group.
Part of group -
You can leave or access a group line. This function must be enabled by the
Tenovis Service.

Phone settings

In this sub--menu, you can make further settings on your telephone (for
example, subsequent DTMF tone dial or key beep).
R
Rec. VIP funct. on / off / auth. -
Receive VIP functions: You can activate the team function on your tele-
phone either for all subscribers or only for authorised users. Authorised
users need to have the entry "VIP number yes" when storing speed dial
numbers.
Then enter your PIN.
Refer back/Dest
You can set whether you can carry out a refer--back immediately with a
partner key, or if you must first press the refer--back key.
• Functions which are labelled with - are not installed as standard on your phone.
When in doubt, look it up
i
91