Metering The Call Charges For Private Calls And Projects - Tenovis TS 13 Operating Instructions Manual

Telephoning with convenience
Viewing call charges

Metering the call charges for private calls and projects -

You want to dial a call number with a project or private PIN.
...
Enter the external line code that has been assigned for dialing with a
project or private code in your telephone system, e.g. "1". This external line code
can contain up to 5 digits.
...
Enter the code that has been assigned for private use or for the re-
spective project, e.g. "3433". This code can contain up to 9 digits.
...
Enter the desired call number.
Lift the handset. The charges for this call will then be metered and billed in the
system for the respective project or private code.
• For security reasons, the code is not shown in the display or when the redial
function is being used. The PIN cannot be stored in the telephone book. If you
want to dial a call number from the call list with a project code, you will need to
manually enter the external line code and the project code in the display of the
call list.
36
i