When In Doubt, Look It Up; Overview Of Telephone Functions - Tenovis TS 13 Operating Instructions Manual

When in doubt, look it up

Overview of telephone functions

If you do not know what is concealed behind a function name—such as Code dial—
then you can look it up here. This alphabetical list contains all functions that can be
assigned to the programmable function keys (! p. 57).
The pages mentioned contain further information on the respective topic.
A
ACD user function -
Activates the ACD user function to log on and off of the automatic call dis-
tribution. The ACD must be enabled by the TENOVIS Service.
Audio / Contrast (! p. 71)
Adjust the loudspeaker volume, the sound of various tones and the con-
trast.
C
Call back
If a subscriber you call is occupying the line, you can activate a signal
which lets you know when the line is free again. Your telephone and that of
the previously occupied subscriber will then ring, allowing you to make a
connection. This is only possible for calls within your system.
Call charges (! p. 34)
You can view a list of the call charges incurred by previous calls.
Call diversion (! p. 27)
You can divert calls to another telephone within your system.
Depending on the telephone system, you can also divert calls to an exter-
nal telephone.
Call pickup (! p. 17)
Allows to pick up a call from another telephone.
When your telephone is idle, enter the call number of the telephone from
which you want to pick up a call, and then press the Pick--up key. The call
is diverted to your telephone. If "Direct dial" has been activated, you will
need to press the Pick--up key before dialing any call numbers.
• Functions which are labelled with - are not installed as standard on your phone.
74
i