Delete All - Tenovis TS 13 Operating Instructions Manual

Menu items on the display
Current PIN
In order to change your PIN, you first need to enter your current PIN.
CSTA Answer Call -
If your telephone network and your PC network for CSTA (Computer Ser-
vice Telephone Application) are connected to each other and the CSTA
Answer Call function is activated, you can also receive calls on your PC.
When the telephone rings, simply click the symbol for the CSTA Answer
Call on your computer screen. The telephone is automatically set to Hands-
free mode and you can speak with the caller.
CW
Code dial: You have assigned the "Code dial" function to a programmable
function key. When you press this key, "CW" is displayed, and you can
enter the desired code dial number.
D
Data bits (AT)
You can set the Baud rate of your telephone for data transfer here. The
settings "7 bit" and "8 bit" are available.
The menu item is only displayed when the AEI mode of operation is set to
"AT command".
Delayed redial
If the number dialed is busy, then you can have the number dialed for you
nine additional times at intervals of 10, 20, 30 or 60 seconds. The time in-
terval setting can be modified by the Tenovis Service.
Delete
The entry is deleted, for example a call list entry.

Delete all

-- All entries in the redial memory are deleted.
Delete all
-- All entries in the call list or the Mailbox are deleted.
Please note:
If you select this menu item, all entries are immediately deleted. To avoid
this, press the Disconnect key.
• Functions which are labelled with - are not installed as standard on your phone.
When in doubt, look it up
i
85