Ift-9011 Null Modem; Power - Infortrend EonStor S12E-R1132-4 Installation And Hardware Reference Manual

EonStor S12E-R1132-4/G1133-2 Installation and Hardware Reference Manual
A12
A13
B.7

IFT-9011 Null Modem

A null modem is used for wire-swap and is necessary for connecting
COM1 CN2 to a PC serial port.
Swap pin 2 and pin 3
Swap pin 4 and pin 6
Swap pin 7 and pin 8
B.8

Power

IEC-type receptacle. Unless specified otherwise, cable type will be
determined by the shipped-to area.
B-6
RX3- B12
GND B13
Table B-5: SAS Expansion Port Pinout Definitions
Figure B-7: Null Modem Pinouts
Table B-6: Null Modem Pinouts
TX3-
GND