Modbus Configuration - Webdyn WebdynRF Installation Manual

If the filtering is activated, the modules configuration is carried out using the following
interface:
Name
Address
Label
Key
8.8

Modbus configuration

Name
Timeout (ms)
Turnaround (ms)
Timeout (ms)
As a supplement to these parameters, the port must be configured as "modbus" (see
section 8.3.2).
WebdynRF – Installation Manual - Version 1.0
Description
Wireless M-Bus address
Name of the module (for information purposes only)
Encryption key for the module (if it is blank, there is
no encryption)
Description
RTU
Modbus/RTU response timeout in ms
Modbus/RTU turnaround delay in ms
TCP
Modbus/TCP response timeout in ms
WEBDYN
WebdynRF
Installation Manual
50