Mounting The Webdynrf On Its Feet; Mounting The Webdynrf On A Din Rail - Webdyn WebdynRF Installation Manual

The WebdynRF gateway must send data from your installation to the remote server
automatically and at regular intervals: for this, you will need to fulfill the following
conditions:
• To send installation data via Ethernet, the network must include a router enabling
access to the Internet.
• To send installation data via a GSM link, the network coverage must be
satisfactory.
• If you are using the remote GSM antenna option, refer to Chapter 4.5 before
assembling the gateway.
To optimize Wavenis and GSM reception sensitivity, you absolutely must keep a
clear space of 20 cm around the antennas.
4.2

Mounting the WebdynRF on its feet

The WebdynRF may be placed on its feet on a flat surface.
4.3

Mounting the WebdynRF on a DIN Rail

The WebdynRF may be mounted on a 35mm standardized metal rail (DIN Rail).
This rail mounting requires additional mounting accessory Ref: KFIX01.
1. Mount the fastening kit onto the gateway:
WebdynRF – Installation Manual - Version 1.0
WEBDYN
WebdynRF
Installation Manual
10