Data Transfer Configuration - Webdyn WebdynRF Installation Manual

Text field for indicating the time zone. The format must comply with
Timezone the TZ format; see the link:
http://en.wikipedia.org/wiki/Zone.tab
Alarm Difference in seconds between the gateway time and the NTP
threshold (s)
synchronization time, above and beyond which an alarm is emitted
IP addresses of the NTP servers used for synchronization of the
NTP servers
gateway's clock

Data transfer configuration

8.2.5
The gateway can put 4 types of data on the remote server:
• The gateway's configuration data.
• The gateway's supervision data.
• Alarms
• Index, Modbus, and RF data.
For each type of data, the gateway can use the FTP method.
The data format can be XML or CSV.
When the CSV format is selected, only the Wavenis data will be in this format. All the
other data will be sent in XML format.
The lodging of data must be associated with a Schedule by filling in its configured
unique ID (see section 8.5).
WebdynRF – Installation Manual - Version 1.0
WEBDYN
WebdynRF
Installation Manual
27