Overview Of The External Interfaces And Of The Leds - Webdyn WebdynRF Installation Manual

5.1

Overview of the external interfaces and of the LEDs

The box's front panel:
Antennas:
RF ANT: Antenna for the RF link.
GSM ANT: Antenna for the GPRS or 3G link.
The buttons:
Button Description
REQUEST Short press => Connection request
Long press (3s) => Displays the reception level for the GSM signal
(see
3 successive long presses => Returns parameters to their factory
settings
RESET Restarts the gateway's hardware
The LEDs:
LED
POWER Lights up when the product is powered up.
CPU
Lights up depending on CPU activity.
RF As its default setting, it is off. It flashes in the event of RF traffic, or
when a computer is connected in transparent mode.
GSM
Lights up during GSM connection.
Lights up for 1 second upon receiving an SMS.
When the Request button is pressed for a long time, it indicates the
level of the RSSI signal received by a number of flashes (0 to 5
times).
0 – Signal power ≤ -112 dBm
1 – Signal power of -111 dBm to -96 dBm
2 – Signal power of -96 dBm to -81 dBm
3 – Signal power of -81 dBm to -66 dBm
4 – Signal power of -66 dBm to -51 dBm
5 – Signal power > -51 dBm
WebdynRF – Installation Manual - Version 1.0
GSM LED)
Description
WEBDYN
WebdynRF
Installation Manual
13