Alarms Configuration; System Alarms - Webdyn WebdynRF Installation Manual

8.4

Alarms configuration

The gateway can generate 3 types of alarm:

• System alarms.

• Wavenis alarms.
• On-off input alarms.
System alarms
8.4.1
There are 5 types of system alarms:
• Power: Alarm generated upon loss and return of the power supply.
• Modem IP: Alarm generated if the gateway's IP address changes.
• MSISDN: Alarm generated if the SIM card inserted in the gateway is changed.
• SW Version: Alarm generated if the gateway's firmware version changes
(during an update)
• Fault.
Each alarm source may be activated individually and be transferred immediately to
the remote server (On) or upon the next connection (Delayed).
The gateway also generates fault alarms, the codes of which are shown below:
D_MODEM
D_ETHERNET
D_WAVENIS
D_INTERNAL_BAT
Each fault is transferred immediately to the remote server by the gateway.
WebdynRF – Installation Manual - Version 1.0
Code
Modem fault
Ethernet interface fault
Wavenis fault
Internal battery fault
Installation Manual
Description
WEBDYN
WebdynRF
30