Table of Contents
Advertisement
8.6.2.4 Using the gateway with Wavenet Monitor
To use the gateway as a Waveport and to put together the Wavenis radio mapping
using the Wavenis Monitor software, follow these steps:
• Connect your PC via Ethernet to the gateway (see section 6.1).
• Activate the Wavenis TCP Bridge mode and specify a TCP port (see section
8.2.6).
• Launch the com0com setup featured in the Windows Start menu:
• Rename the CNCA1 port as a serial port name from the available names
ranging from COM1 to COM9 (for example COM9):
• Click on Apply and on Continue:
WebdynRF – Installation Manual - Version 1.0
WEBDYN
WebdynRF
Installation Manual
42
Advertisement
Table of Contents
Need help?
Do you have a question about the WebdynRF and is the answer not in the manual?