Table of Contents
Advertisement
Blackout To blackout all the fixture
Function Strobe
Select Color
1. Synchronous strobe
in white color
Color 1-16 or
2. The same color chase
manual setting
3. Different color strobe
color
Mode
Sound 1
Manual
(LED OFF)
(LED ON)
6. DMX512 Configuration
Select show
Select Chase
Show 1-12
Chase 1-16 or fade
Sound 2
Auto
(LED slow blinking)
(LED fast blinking)
11-
4. How To Set The Unit
4.1 Control Panel
1 Display: To show the various menus and the selected functions
LED:
2 DMX
On
3 MASTER
On
On
4 SLAVE
5 SOUND
Flashing
Button:
6 MENU
To select the programming functions
7 DOWN
To go backward in the selected functions
8 UP
To go forward in the selected functions
9 ENTER
To confirm the selected functions
10 Microphone: Receive music for the sound active.
11 Only for remote control: By connect to the CA-8 or CA-9 RTX to control the unit for
Stand by, Function and Mode function.
12 DMX output: For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.
13 DMX input: For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal.
14 Mains input: Connect to supply mains power.
15 Mains output: Connect to supply mains power for the next unit.
DMX input present
Master Mode
Slave Mode
Sound activation
4-
Advertisement
Table of Contents
