Table of Contents
Advertisement
DMX 512 Address Setting
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to change the DMX512 address.
Once selected, press the ENTER button to store or automatically return to the main
functions without any changes after 8 seconds. To go back to the functions without any
change press the MENU button again.
Channel mode
Press the MENU button up to when the
ENTER button and the display will blink. Use the DOWN and UP button to select the
(channel 1) or
(channel 2) or
mode. Once the mode has been selected, press the ENTER button to setup or automatically
return to the main functions without any change after 8 seconds. To go back to the functions
without any change press the MENU button again.
Show Mode
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to select the
show) or
(show 1) or
has been selected, press the ENTER button to confirm, if you select
(show 2) or ...
(show 12), you can press DOWN and UP button to select
(slowest) or
(fastest), press ENTER button to store or automatically
return to the main functions without any change after 8 seconds. To go back to the functions
without any change press the MENU button again.
Chase Mode
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to select the
or ... or
(chase 16) or
the ENTER button to confirm, then press DOWN and UP button to select
or
(fastest), press ENTER button to store or automatically return to the main
functions without any change after 8 seconds. To go back to the functions without any
change press the MENU button again.
is shown on the display. Press ENTER
is shown on the display. Pressing the
(channel 3) or
is shown on the display. Pressing ENTER
(show 2) or ...
(show 12). Once the show
is shown on the display. Pressing ENTER
(fade). Once the chase has been selected, press
7-
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to select the
(normal) or ... or
press the ENTER button to setup or automatically return to the main functions without any
change after 8 seconds. To go back to the functions without any change press the MENU
button again.
Press the MENU button up to when the
(channel 4)
button and the display will blink. Use DOWN and UP button to select the
control on) or
ENTER button to setup or automatically return to the main functions without any change
after 8 seconds. To go back to the functions without any change press the MENU button
again.
Blackout Mode
(auto
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to select the
blackout) or
(show 1) or
ENTER button to setup or automatically return to the main functions without any change
after 8 seconds. To go back to the functions without any change press the MENU button
again.
Color Mode
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to select the
(chase 1)
or ... or
button to confirm, if you select
(slowest)
button to select
confirm, then use DOWN and UP button to adjust the value (0-255) and press ENTER
button to store, automatically return to the main functions without any change after 8
seconds. To go back to the functions without any change press the MENU button again.
Slave Mode
is shown on the display. Pressing ENTER
(16 light show) mode. Once the mode has been selected,
Sound control
is shown on the display. Pressing ENTER
(sound control off). Once the mode has been selected, press the
is shown on the display. Pressing ENTER
(yes blackout) mode. Once the mode has been selected, press the
is shown on the display. Pressing ENTER
(show 16) or
(manual setting). Once select, press the ENTER
(manual setting), you can press DOWN and UP
(red) or
(green) or
8-
(Mater) or
(sound
(no
(color 1)
(blue), press ENTER button to
Advertisement
Table of Contents
