Roland CammJet CJ-500 User Manual page 84

Description of Menu Items
Press the key
MENU
DEMO
MENU
CALIBRATION
MENU
BIDIRECTION
MENU
OVER PRINT
MENU
DRYING TIME
MENU
EDGE SENSE
MENU
CROP MARK
MENU
TIME OUT
MENU
ENV.MATCH
MENU
FACTORY DEFAULT
MENU
PRINT-CUT ADJ.
82
DEMO
PRINT & CUT
PRINT & CUT/PRINT/CUT
CALIBRATION
PRINTING ADJ.
CALIBRATION
CUTTING ADJ.
BIDIRECTION
TEST PRINT
BIDIRECTION
ADJUST
OVER PRINT
NONE 2
NONE/ 2 / 3
DRYING TIME
15sec 15sec
NONE/ 10 to 990 (In steps of 10 sec.)
EDGE SENSE
ENABLE DISABLE
ENABLE/DISABLE
CROP MARK
ENABLE DISABLE
ENABLE/DISABLE
TIME OUT
15sec 15sec
NONE/ 10 to 990 (In steps of 10 sec.)
FACTORY DEFAULT
NOW PROCESSING..
PRINT-CUT ADJ.
TEST PRINT
PRINT-CUT ADJ.
FEED ADJUST
PRINT-CUT ADJ.
SCAN ADJUST
PRINT-CUT ADJ.
AUTO
PRINTING ADJ.
TEST PRINT
PRINTING ADJ.
ADJUST
CUTTING ADJ.
FEED ADJUST
CUTTING ADJ.
SCAN ADJUST
ADJUST
+0 +0
-15 to +15 (In steps of 1)
¥ Move to the previous menu screen or the
next menu screen
¥ Select the value for a setting
¥ Moves the material
(when specifying the printing/cutting location)
¥ Move to a submenu screen
¥ Moves the carriage
(when specifying the printing/cutting location)
¥ Move to the previous menu screen
¥ Moves the carriage
(when specifying the printing/cutting location)
¥ Executes the menu
¥ Locks in the value for a setting
FEED ADJUST
0.0mm 0.0mm
-2.0 to +2.0 mm (In steps of 0.1 mm)
SCAN ADJUST
0.0mm 0.0mm
-2.0 to +2.0 mm (In steps of 0.1 mm)
NOW PROCESSING..
ADJUST
+0.25% +0.30%
FEED ADJUST
+0.00% +0.00%
SCAN ADJUST
+0.00% +0.00%