Display Menus Flowchart - Roland CammJet CJ-500 User Manual

Display Menus Flowchart

For details about each of the menus, see the "Description of Display Menus."
Press the
key
Roland CJ-500
Ver.1.00
When the power is turned
on for the first time, or turned
on after removing the ink
Roland CJ-500
PIGMENT CMYKLcLm
SETUP SHEET
ROLL EDGE PIECE
Use or to select.
Press the [ENTER] key
to enable the setting.
Press the
[BASE POINT] key
AUTO CROP MARK
BASE
PRESS SETUP KEY
Selecting the language for screen messages
No ink is filled.
Roland CJ-500
UNKNOWN INK TYPE
Select the installed ink
SELECT INK TYPE type and press the
PIG.CMYKLcLm
[ENTER] key.
PIG. CMYKLcLm/PIG. CMYKOrGr/
DYE CMYKLcLm
INSTALL
Attach the drain bottle,
DRAIN BOTTLE
and press [ENTER] key.
The system will execute
NOW FILLING INK
ink fill.
If [EDGE SENSE] is [DISABLE].
SETUP SHEET
ROLL
Press the key
Choose [BASE] or
[BASE-ALIGN], then press
the [ENTER] key
+
MENU LANGUAGE
ENGLISH Use
Press the [ENTER] key
to enable the setting.
MENU LANGUAGE
JAPANESE
Load the material and press
the
NOW PROCESSING..
Printing/cutting area
of the loaded material
(width).
Top
W1000mm L1230mm
menu
FINE
The settings for [PRINT MODE] (Print Direction)
display only in the case of [BI-DIRECTION].
Settings for [PRINT MODE] (Print Mode)
PHOTO/SUPER/FINE/FINE2/NORMAL/FAST/DRAFT
Description of Menu Items
or to select.
key
Printing/cutting area of the
loaded material (length).
*This is not displayed
when [ROLL] or [EDGE]
has been selected.
BI-DIR
81