Roland CammJet CJ-500 User Manual page 74

User's Reference
CJ-400:
90 to 1117 mm (3-9/16 to 44 in.)
* However, when loading material with a width of 90 to 430 mm (3-9/16 to 17 in.), set the [EDGE SENSE] menu
item to [DISABLE].
Material
Approx. 937 mm (36-7/8 in.)
Approx. 1117 mm (44 in.)
Material with
a width
937 and 1117 mm
(36-7/8 and 44 in.)
: Grit roller
: Pinch roller (left)
(*) Position of the pinch roller (middle) when using material with a width of 742, 922, 937 and 1117 mm.
* Lowering the middle pinch roller during printing may damage the printing surface. At such times, position the pinch
rollers away from above the grit rollers.
72
Approx. 742 mm (29-3/16 in.)
Approx. 922 mm (36-5/16 in.)
Material with
Material with
a width a width
742 and 922 mm 430 and 610 mm
(16-15/16 and 24 in.)
(29-3/16 and 36-5/16 in.)
: Pinch roller (middle)
: Pinch roller (right)
Approx. 430 mm (16-15/16 in.)
Approx. 610 mm (24 in.)
(*)
* Make sure the left and right pinch rollers
are positioned above the grit rollers.
180 mm
(7-1/16 in.)