Product Specification - Sanyo PJ-Net Organizer POA-PN30 Owner's Manual

Table of Contents

Advertisement

Product specification

Type.......................................PJ-Net Organizer (Network Unit)
LAN interface ........................Applicant regulation IEEE802.3 (10Base-T)
Network protocol .................. TCP/IP specification
Serial interface ......................RS-232C
Power source ........................Supplied from the projection monitor
Power consumption ..............3.0 watts
Dimensions (W x H x D)........4.13" x 5.20" x 1.32" (105 x132 x 33.6 x mm)
Weight...................................0.57 lbs (258 g)
Built-in battery.......................Lithium battery, Type CR2032, 3.0V
Operating temperature .........41˚F ~ 95 ˚F (5˚C ~ 35 ˚C)
Storage temperature.............14˚F ~ 140˚F (-10˚C ~ 60˚C)
* The specifications are subject to change without notice.
IEEE802.3u (100Base-TX)
Data transfer speed
Data transfer mode
Terminal
Baud rate
0.3/1.2/2.4/4.8/9.6/19.2/28.8/57 .6/115.2 Kbps
Flow control
Hardware flow control (RTS/CTS, Xon/Xoff)
Parity check
Odd/Even
Terminal
D sub 9-pin Male
10Mbps/100Mbps
Half duplex/Full Duplex
8-pin modular (RJ-45)
TCP/IP
Product specification
75
PJ-NET ORGANIZER
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Table of Contents