Sanyo PJ-Net Organizer POA-PN30 Owner's Manual page 39

About projection monitor condition
Status
Normal..............................................Projection monitor is operating normally.
Power management in operation......Power management is operating
Lamp failure......................................Lamp failure is occurring
Abnormal Temperature .....................The temperature of the projection monitor became too high
Cooling down after Abnormal Temp............. Projection monitor detects abnormal temp. and is cooling down
Standby after Abnormal Temp. ..................Projection monitor detects abnormal temp. and sets into standby
Power failure ........................................Power failure has occurred inside the projection monitor. Projection
Click this icon to display
further information of
the power failure.
✐ The web browser checks and updates the projection monitor's condition every 30 seconds auto-
matically.
Description
itself.
mode.
monitor is turned off. Disconnect the AC cord and ask servicing to
a qualified service personnel.
If the power failure occurs on the projection monitor, "Power fail-
ure" is indicated on the status column and the information icon
appears on the power column as shown below. Click this icon to
display further information of the power failure.
Power control and status check
PJ-NET ORGANIZER
OWNER'S MANUAL
39