Sanyo PJ-Net Organizer POA-PN30 Owner's Manual page 34

Chapter 3 Basic Setting and Operation
● When the life span of lamp terminated:
TITLE: Message from PJ monitor
11-03-2004 00:59
PJ monitor Model Name: model name
TCP/IP: 192.168.1.201 PJ monitor Name: Proj_05
It sends you following message.
*The life span of lamp is reached.
✐ Replace it with a new lamp immediately and reset the lamp counter. If the projection
monitor is used without resetting the lamp counter, the alert mail is sent to users
in every power-on of the projection monitor. This alert mail will not be sent when
unchecking the mail sending condition "When the life span of lamp is reached".
● When the lamp use time reached preselect lamp use time:
TITLE: Message from PJ monitor
11-03-2004 00:59
PJ monitor Model Name: model name
TCP/IP: 192.168.1.201 PJ monitor Name: Proj_05
It sends you following message.
*The accumulated lamp use time reaches 400 hours.
Prepare for the lamp replacement.
✐ The Network Unit sends a free message when the lamp use time reaches the prese-
lected lamp use time. It can be used for preparation of the lamp replacement and the
maintenance required.
34
Free messages