Image Adjustment - Sanyo PJ-Net Organizer POA-PN30 Owner's Manual

Chapter 4 Controlling the Projection Monitor

Image adjustment

This function is to adjust the projected picture image and save the image mode. To
store the adjusted value, click Store button, and to load the adjusted value, click Load
button.
Image mode AV
Standard(AV)
✔
Cinema1
✔
Cinema2
✔
Game
✔
Dynamic
✔
Standard(PC)
Real
Image
✔
42
Item
Contrast .............Adjusts picture contrast (-31~ 31)
Brightness .........Adjusts picture brightness (-31~ 31)
Color ..................Adjusts picture color saturation (-31~ 31)
Tint.....................Adjusts picture hue (-31~ 31)
Item
Color Temp. ...........Sets a color temperature mode. (High, Mid, Low1,
White Balance
Red, Green,
Blue ................Adjusts each white balance respectively. (-31~ 31)
Sharpness .........Adjusts picture sharpness. (-7~ 7)
* When changing the value of the white balance, the color temp. indi-
cates "Adj."
Item
Gamma................Adjusts brightness of darker part of the picture. (-7~ 7)
Auto grayscale ...Switches automatic grayscale mode (ON, OFF)
Reset .................Resets the Image adjustment to previous levels.
Store ..................Stores the Image adjustment values. Select an
Load ..................Loads the Image mode. Select an image mode
PC
*
*
*
*
✔
✐ The mark "
*
✔
selected input mode. The error message appears when
*
✔
selecting the disabled image mode indicated with "*".
✔
Description
Description
Low2, Low3, Adj.)
Description
item [Image] from the pull-down menu and click
Save button.
from the pull-down menu and click Load button.
There may not be available mode depending on the
input mode as shown in the table left.
" means that the available image mode in the
✔