Table of Contents
Advertisement
Chapter 3 Basic Setting and Operation
Initial Setting
Power & Status
PC Adj.
Control
Setting
E-mail Setting
Save
Network
Multi Control
Timer
Information
SNMP Setting
Caution
!
Use of Battery
This product provides a lithium battery. When the battery runs down, the clock and timer func-
tions do not operate properly. Contact your local dealer for the replacement of battery. The
replacement must be carried out by a qualified service personnel.
28
!
Initial setting
After installing this product to the projection monitor, per-
form the following basic initial setting.
Click Initial Setting on the main menu to display the initial
setting page.
There are two sub menus, Initial setting and Serial Port
setting sub menu. PIN code, Temperature unit, Date and
Time can be set on Initial setting page, and Serial Port set-
ting page is used for controlling the external equipment
through the RS-232C serial port. For further description of
setting and operation, refer to chapter 5 "Use of Serial Port"
(☞p.59)
The model name of the projection monitor on which this
product is mounted is displayed on the page.
Item
Description
Model name.......Indicates the model name of the projection monitor
provided with the Network Unit.
PIN code............Sets the PIN code to login the setting page (☞p.29)
Temperature ......Switches display temperature unit Centigrade or
Fahrenheit.
Time setting .......When clicking AUTO button, the time which is set
on your computer is set to the Network Unit.
Date ...................Sets date in manual
Time...................Sets time in manual
Advertisement
Table of Contents
