Register the projection monitor
To use the multi control function, register the IP address of the projection monitor you
intend to control. Click PJ registration sub menu tab and set the IP address and Memo,
then click Set button.
Confirmation of registered projection monitor
To check the registered information, click Conf. &
Change sub menu tab. The registered information of
the projection monitor is listed as the below.
* The word "None" is displayed if not using the "Memo" func-
tion.
Memo
Page no.
✐ 10 projection monitors per a page can be registered and up to 100 sets can be registered for
the multi-control.
Items
Description
IP address .........Enter IP address of the projection monitor to con-
trol
Memo.................Enter projection monitor name or installed location
etc.
IP address
Status
Multi-control
* When you click on a listed IP
address, the login page for the
selected projection monitor will
be displayed with a new window.
Click here to close
the sub menu Conf.
& Change".
PJ-NET ORGANIZER
OWNER'S MANUAL
55