Projection Monitor Information - Sanyo PJ-Net Organizer POA-PN30 Owner's Manual

Chapter 4 Controlling the Projection Monitor
Initial Setting
Power & Status
PC Adj.
Control
Setting
E-mail Setting
Save
Network
Multi Control
Timer
Information
SNMP Setting
Indication of the lamp status
Icon display/background
White-Yellow/Blue
White-Yellow/Red
Gray/Blue
Gray/Red
Red/Blue with X
Red/Red with X
52

Projection monitor information

This page is to display the basic information of the projec-
tion monitor status. Click Information on the main menu.
Items
Input ..................Displays selected input and source.
System...............Displays selected signal system.
Signal.................Input signal status (Yes, No)
Screen ...............Displays screen mode.
Lamp status ........Displays lamp status with an animation. Refer to
PJ time...............Displays the accumulated use time of the projec-
Lamp time..........Displays the use time of the lamp.
Timer .................Displays the timer setting status.
Status
Lamp on (Normal)
Lamp on (Lamp is being used over a specified use time, replace lamp
immediately)
Lamp off (Normal)
Lamp off (Lamp is being used over a specified use time, replace lamp
immediately)
Lamp failure (Lamp failure, check lamp condition)
Lamp failure (Lamp failure and lamp is being used over a specified use
time, replace lamp immediately)
Description
the table below.
tion monitor.
ON Timer has been set.
OFF No timer setting.