Examples Of Connection - Sanyo PJ-Net Organizer POA-PN30 Owner's Manual

Chapter 6 Appendix

Examples of connection

Peer-To-Peer connection
Connecting the projection monitor (PJ01) to the control computer (PC05) directly.
Computer Name: PC05
IP Address
Subnet Mask
Default Gateway
DNS
Connecting the projection monitor (PJ01) to the control computer (PC05) via the hub.
To another network
Computer Name: PC05
IP Address
Subnet Mask
Default Gateway
DNS
✐ When the projection monitor is connected to the computer directly without hub, the UTP
cross cable should be used.
68
* UTP cross cable
: 192.168.0.5
: 255.255.255.0
:
:
: 192.168.0.5
: 255.255.255.0
:
:
Computer Name: PC10
IP Address
Subnet Mask
Default Gateway
DNS
Projector Name: PJ01
IP Address
Subnet Mask
Default Gateway
DNS
Hub
: 192.168.0.10
: 255.255.255.0
:
:
: 192.168.0.2
: 255.255.255.0
: 0.0.0.0
: 0.0.0.0
Projector Name: PJ01
IP Address : 192.168.0.2
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
DNS : 0.0.0.0