Conf. & Change Page In The Light Mode; Controlling All Together; Setting All Together - Sanyo PJ-Net Organizer POA-PN30 Owner's Manual

(Conf.&Change page in the light mode)

Controlling all together

"Power & Status", "PC adjustment", "Control" and
"Setting" can be controlled all together. Set "ON" the
multi control setting and adjust controls of each menu.
The setting value is applied to the registered projection
monitors sequentially .
This is effective only if the mode of the registered projection
✐
monitor is set to "Control".

Setting all together

"E-mail setting", "SNMP setting" and "Timer" can be set
all together. Set "ON" the multi control setting and items
of each menu. The setting value is applied to the regis-
tered projection monitors sequentially.
This is effective only if the mode of the registered projection
✐
monitor is set to "Control".
Conf. & Change page in the light mode
Following functions in the "Conf. & Change" page are
not available in the light mode.
- Changing the control mode.
- Deleting the registered IP address
- Indicating the each status
- Indicating the each memo
This indicates that the
mode is "Control".
Multi-control
57
PJ-NET ORGANIZER
OWNER'S MANUAL