Setting Up The Projection Monitor - Sanyo PJ-Net Organizer POA-PN30 Owner's Manual

Initial Setting
Power & Status
PC Adj.
Control
Setting
E-mail Setting
Save
Network
Multi Control
Timer
Information
SNMP Setting

Setting up the projection monitor

This function is to set up the projection monitor. Select the
sub menu [Screen setting] or [Setting] and then set up each
setting.
Item Description
Screen ...............Switches the screen mode. (Full, Zoom, Caption
in, Normal, Natural wide, True, Digital Zoom) There
may not be available mode depending on the input
mode as shown in the table below.
Screen mode
Full
Zoom
Caption in
Normal
Natural wide
True
Digital zoom
✐ The mark " " means that the available screen mode in the
✔
selected input source system. The error message appears
when selecting the disabled screen mode indicated with "*".
Item Description
Blue back...........Sets screen background to blue when no signal
input. (ON, OFF)
Display...............Switches on or off the on-screen menu display on
the screen.(ON, OFF)
Background color....Sets background color of the on-screen menu.
(ON, OFF)
No operation shut
off timer................Enables or disables the shut off timer if the period
of no operation is continued for more than 3 hours.
(ON, OFF)
Remote control
ID.....Sets the remote control ID.(Code 1 - Code 8)
On start..............Sets the power-on mode when connecting the AC
cord to the outlet. (ON, OFF)
Key lock .............Sets the prohibition of the controls with the
remote control or the keys on the projection moni-
tor or both of them. (OFF , PJ, RC, PJ & RC )
Setting up the projection monitor
AV PC
✔ ✔
*
✔
*
✔
✔ ✔
*
✔
*
✔
*
✔
PJ-NET ORGANIZER
OWNER'S MANUAL
45