Dedicated Micros SD Range Installation And Operation Manual page 39

Display activity area
Remote Alarm Reporting
Email on activity
Log event
Switch to camera
Sounder
Edit grid (Red)
Cancel (Purple)
Save
Dedicated Micros ©2007
• Outdoor Low.
• Very Low (lowest sensitivity level)
Use this option to test and tune the sensitivity and activity grid
configuration for each camera. When activity is detected on the
camera, a yellow box is displayed on-screen. Press the MODE
button to exit the test.
This must be enabled for the unit to automatically connect on
alarm, it must also be configured on the Alarm option. Ensure that
the Report settings have been configured in Alarms -> Remote
Reporting menu.
Enable this to send an email on receipt of an alarm. Ensure that
the email settings have been configured in Network-> Advanced->
Email settings.
The SD DVR can record all Events, both Alarms and Activity.
Enable this to have the event written to the log.
The SD DVR can display the primary camera associated with this
alarm on the operator monitor.
The unit has a buzzer which can sound for five seconds when an
alarm or activity are detected.
This button will open the Activity Grid editor for this camera (see
Activity Grid below).
Settings are automatically saved when the page is closed. Use
this button to cancel any changes before navigating away from
the page.
To 'manually' save changes whilst in a menu page, select the
Save button.