Email Settings - Dedicated Micros SD Range Installation And Operation Manual

Cancel (Purple)
Save

Email Settings

Mail Server
Recipient address
Recipient display name
Reply to address
Reply to display name
Sender address
Sender display name
E-mail Logging
Network (Red)
Cancel (Purple)
Save
Dedicated Micros ©2007
Settings are automatically saved when the page is closed. Use
this button to cancel any changes before navigating away from
the page.
To 'manually' save changes whilst in a menu page, select the
Save button.
This is the IP address or URL of the SMTP Server that the e-mail
from the unit will be sent to. The SMTP server will then forward
this onto the recipient.
This is the e-mail address and display name of the intended
recipient of the e-mailed image.
This is the addressee name that will be shown in the email name
field.
This field must be configured if the recipient is to reply to an
e-mail. The unit does not accept e-mails so this must be a valid
e-mail address.
This is the reply to name that will be shown in the email name
field.
These optional fields indicate the source of the e-mail notification.
If the fields are left blank the unit will use the system name & DNS
name to create a sender name.
This is the sender name that will be shown in the email name
field.
A log can be created for every e-mail transaction that the unit
issues.
This button will open the Network page (see Network).
Settings are automatically saved when the page is closed. Use
this button to cancel any changes before navigating away from
the page.
To 'manually' save changes whilst in a menu page, select the
Save button.