Record Options - Dedicated Micros SD Range Installation And Operation Manual

Record Options

Timed expiry (days)
Warning:
Alarm protection
Alarm protection duration (days) This drop down sets how long Alarm images will be protected
4CIF interlace enable
Manual Image protection
Advanced (Red)
Cancel (Purple)
Save
0
Images recorded onto disk can be programmed to expire after
a user-defined number of days and hours. This option has been
designed to assist where the installation requirements define that
recorded images must adhere to legislation on retaining images
for a maximum record time, for example 31 days.
All images older than the selected timed expiry will no longer be available.
Alarm images can be protected from overwriting.
This can be switched On if the system will be used to record using
the 4CIF settings, and will eliminate the comb effect that may be
visible in a high motion recording environment. It is not required
if not using 4CIF, and may not be required if not recording high
motion.
It is possible to protect images stored on the unit hard drives.
These images will not be overwritten (see overleaf for further
details).
This button opens the Advanced Setting page.
Settings are automatically saved when the page is closed. Use
this button to cancel any changes before navigating away from
the page.
To 'manually' save changes whilst in a menu page, select the
Save button.
Dedicated Micros ©2007