Removing The Multi Card Slot - NEC Versa M540/PB EasYnote R7 Disassembly Manual

5. Remove two screws at the VGA port to separate Main Board from System Bracket.
M3x7 Silver
Releasing System Bracket
Fig. 33

Removing the Multi Card Slot

To remove the Multi Card Slot, first remove the Main Board (see Removing the Main Board),
then perform the following steps:
1. Unscrew the screws on the Multi Card Slot assembly as shown in Fig. 34 and remove the
Multi Card Slot from the Main Board.
M2x3.5 Black
Multi Card Slot
Fig. 34
NEC Versa M540/PB EasyNote R7 Disassembly Manual
Page 21