Removing The Lcd Display - NEC Versa P700 Disassembly Manual

Fig. 11: Disconnecting the flat cable of the LED assy from the main board
4. Remove the screws marked in the next picture.
5. Finally carefully remove the LED assy and put it aside.

Removing the LCD display

To remove the LCD display, first remove the keyboard cover (see
disconnect the antenna from the Wireless Mini PCI Card (see the section
Wireless Mini PCI
1. Close the LCD cover.
2. Turn the notebook up-side down.
3. Remove the two screws shown in the picture that follows:
Fig. 12: Unscrewing the LED assy
Card), then perform the following steps:
NEC Versa P700 Disassembly Manual
Removing the Keyboard),
Removing the
A (M2.5x9)
B (M2x3)
Page 10