1. Manuals
  2. Brands
  3. NEC Manuals
  4. Laptop
  5. Versa M540/PB EasYnote R7
  6. Disassembly manual

NEC Versa M540/PB EasYnote R7 Disassembly Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

NEC
Versa M540
Disassembly Manual

Advertisement

Table of Contents
loading

Related Manuals for NEC Versa M540/PB EasYnote R7

Summary of Contents for NEC Versa M540/PB EasYnote R7

  • Page 1 Versa M540 Disassembly Manual...

  • Page 2: Table Of Contents

    Removing the LCD Module ..........................15 Removing the LCD Panel.............................17 Removing the Main Board............................19 Removing the Multi Card Slot..........................21 Removing the Touch Pad.............................22 Removing the Speaker Assembly ........................22 DIP Switch Setting..............................23 Screws..................................24 Notice ...................................25 NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 2...

  • Page 3: Overview

    Furthermore, the screws that are removed are shown next to the image of the parts themselves. NEC reserves the right to make changes to the Versa M540/EasyNote R7 chassis without notice. Technician Notes Only technicians authorized by NEC Computers International BV should attempt to repair this equipment.

  • Page 4: Hazardous Voltage

    Inside the power supply are hazardous avviare il sistema senza aver prima messo a voltages that can cause serious personal injury. Always posto il coperchio return a defective power supply to your dealer. NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 4...

  • Page 5: Removing The Battery

    3. Unlock the left battery lock 4. Pushing battery lock on right outward and slide the battery out of its place as the arrow shows in Fig. 1 Removing the battery Fig. 1 NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 5...

  • Page 6: Removing The Hard Disk Drive

    M2x3.5 Black Removing the Hard disk drive cover Fig. 2 2. Unscrew the HDD module and disconnect it as shown in Fig. 3 M2.5x7 Black Disconnecting the hard disk drive Fig. 3 NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 6...

  • Page 7: Removing The Optical Disk Drive

    Ejecting ODD tray Fig. 5 2. Release screw as shown in Fig. 6 and then hold on ODD tray to pull out ODD module. M2.5x5 Black Removing the optical drive Fig. 6 NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 7...

  • Page 8: Removing The Memory Module

    Removing the screw retaining the memory module slot cover Fig. 7 2. Unclip the memory module as shown in Fig. 8 Removing the memory module Fig. 8 3. Remove the memory module from its slot and put it aside. NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 8...

  • Page 9: Removing The Wlan Module And Mdc Modem Module

    2. Disconnect Wireless Antenna and unclip the memory module as shown in Fig. 10 Removing the WLAN module Fig. 10 3. Unscrew MDC modem and disconnect the MDC modem cable before remove it. M2x3.5 Black Removing the MDC Modem module Fig. 11 NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 9...

  • Page 10: Removing The Cpu

    2. Release all screws on the heat sink, disconnect the Fan connector and carefully remove the heat sink as shown in Fig. 13 A = M2x3.5 Black B = M2x11 Silver Removing the heat sink Fig. 13 NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 10...
  • Page 11 3. Unlock the CPU and carefully remove it from the CPU socket as shown in Fig. 14 Unlocking the CPU Fig. 14 NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 11...

  • Page 12: Removing The Keyboard

    1. Use flat screw driver to unlock Keyboard as shown in Fig. 15 Unlock Keyboard Fig. 15 2. Lift up the keyboard and disconnect it from the system as shown in Fig. 16 Removing the keyboard flat cable Fig. 16 NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 12...

  • Page 13: Removing The Top Cover

    Removing the GPU Heat sink Fig. 17 2. Release all screws as shown in Fig. 18 A = M2.5x7 Black B = M2.5x17 Black C = M2x3.5 Black Removing the top cover screws Fig. 18 NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 13...
  • Page 14 3. Flip over the unit and remove the screws then disconnect touch pad flat cable as shown in Fig. 19 M2.5x7 Black Disconnect Touch Pad Flat Cable Fig. 19 4. Carefully lift up the top cover, release it and put it aside. Removing the Top Cover Fig. 20 NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 14...

  • Page 15: Removing The Lcd Module

    Releasing LCD hinge cover Fig. 21 2. Unscrew all screw encircle on Heat Plate as shown in Fig. 22 and carefully separate it from base unit. M2x3 Silver Removing the Heat Plate Fig. 22 NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 15...
  • Page 16 4. Release the screws on the LCD Hinges as shown in Fig. 24 M2.5x5 Black Releasing the LCD Hinges Fig. 24 5. Carefully lift up the LCD module and place it in a safe place. NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 16...

  • Page 17: Removing The Lcd Panel

    M2.5x7 Black Screws on the LCD Module Fig. 25 Release the LCD Bezel from the side carefully and put it aside as shown in Fig. 26 Removing the LCD Bezel Fig. 26 NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 17...
  • Page 18 Inverter board. Disconnect the inverter connector remaining on the left side of the inverter board. Put a side the inverter board. 7. Remove the screws on both sides of the LCD panel in order to release the LCD hinges. NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 18...

  • Page 19: Removing The Main Board

    1. Remove side cover at both corner of the base unit as shown in Fig. 29 Removing side cover Fig. 29 2. Release two screws at rear of the base unit as shown in Fig. 30 M2.5x5 Black Rear view of Base unit Fig. 30 NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 19...
  • Page 20 3. Release all screws as shown in Fig. 31 and disconnect all speaker connection to Main Board. M2.5x5 Black Lifting up the Main Board assembly Fig. 31 4. Carefully lift up the Main Board together with System Bracket. Lifting up Main board Fig. 32 NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 20...

  • Page 21: Removing The Multi Card Slot

    1. Unscrew the screws on the Multi Card Slot assembly as shown in Fig. 34 and remove the Multi Card Slot from the Main Board. M2x3.5 Black Multi Card Slot Fig. 34 NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 21...

  • Page 22: Removing The Touch Pad

    To remove the Speaker assembly, first remove the Main Board (see Removing the Main Board), then perform the following steps: 1. Remove the screws holding speaker on System Bracket as shown in Fig. 36 M2x4 Black Speaker Fig. 36 NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 22...

  • Page 23: Dip Switch Setting

    3. Removing screws on Woofer as shown in Fig. 37 M2.5x7 Silver Woofer Fig. 37 4. Carefully separate it from Bottom Cover. DIP Switch Setting No DIP Switch settings are available for the Versa M540/EasyNote R7. NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 23...

  • Page 24: Screws

    Screws M2x3.5 Black M2.5x7 Black M2x11 Silver M2x7 Silver M2.5x17 Black M2x3 Silver M2.5x5 Black M2.5x5 Silver M3x7 Silver M2x4 Black M2.5x7 Silver NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 24...

  • Page 25: Notice

    This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form or by any means without prior written consent from NEC Computers International BV. NEC COMPUTERS INTERNATIONAL BV SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN;...

Table of Contents