Removing The Lcd Panel - NEC VERSA M350 Disassembly Manual

Removing the LCD Panel

To remove the LCD panel, first remove the LCD module (see
then perform the following steps:
1. Use a pin to remove the rubber cover on the LCD module as shown in Fig. 27
2. Remove all screws as shown in Fig. 27 and carefully remove the LCD cover.
Fig. 27 Removing the rubber covers & screws on the LCD Module
3. Removing LCD Bezel as shown in Fig. 28
Fig. 28 Removing LCD Bezel
NEC VERSA M350/P550 Disassembly Manual
Removing the LCD Module),
M2.5X7 Copper
Page 19