Removing The Lcd Panel - NEC VERSA P600 Disassembly Manual

Removing the LCD Panel

To remove the LCD Panel, first remove the LCD Module (see
perform the following steps:
1. Unscrew all screws shown in Fig. 22
2. Release the LCD Bezel carefully and put it aside as shown in Fig. 23
3. Unscrew all screws encircled in Fig. 24 disconnect the inverter board and put it aside.
A A
B
Fig. 22 Screws on the LCD Module
Fig. 23 Removing the LCD Bezel
NEC Versa P600 Disassembly Manual
Removing the LCD
A A
B
Module), then
A = M2x3.5
Silver
B= M2x5
Silver
Page 15