Removing The Wlan Module And Mdc Modem Module - NEC Versa M540/PB EasYnote R7 Disassembly Manual

Removing the WLAN Module and MDC Modem Module

To remove the WLAN Module and MDC modem Module, first remove the Battery (see
Removing the Battery) then perform the following steps:
1. Release the screws retaining the WLAN/MDC cover.
2. Disconnect Wireless Antenna and unclip the memory module as shown in Fig. 10
3. Unscrew MDC modem and disconnect the MDC modem cable before remove it.
NEC Versa M540/PB EasyNote R7 Disassembly Manual
Removing WLAN/MDC cover
Fig. 9
Removing the WLAN module
Fig. 10
Removing the MDC Modem module
Fig. 11
M2x3.5 Black
M2x3.5 Black
Page 9