Removing The 15" Lcd Panel - NEC Versa M400 PB EasyNoteM5 Disassembly Manual

Removing the 15" LCD Panel

To remove the LCD panel, first remove the LCD module (see
perform the following steps:
1. Use a pin to remove the rubber covers on the LCD module as shown in Fig. 16 & Fig. 17
2. Unscrew all screws shown in Fig. 17
NEC Versa M400/PB EasyNoteM5 M7 Disassembly Manual
Removing the rubber covers on the LCD Module
Fig. 16
Screws on the LCD Module
Fig. 17
Removing the LCD Module), then
A = M2x4 Black
B = M2.5x7
Black
Page 14