Removing The Main Board - NEC Versa M540/PB EasYnote R7 Disassembly Manual

Removing the Main Board

To remove the main board, first remove the Bottom Cover (See
then perform the following steps:
1. Remove side cover at both corner of the base unit as shown in Fig. 29
2. Release two screws at rear of the base unit as shown in Fig. 30
NEC Versa M540/PB EasyNote R7 Disassembly Manual
Removing side cover
Fig. 29
Rear view of Base unit
Fig. 30
Removing the Bottom Cover)
M2.5x5 Black
Page 19