Blackmagicdesign ATEM Television Studio Installation And Operation Manual page 23

Connecting Video Outputs
23
Multi View HDMI Output
This HDMI output is always high definition and includes 8 video input views, as well as preview and program
views. Tally is included with red for sources on air, and green for sources selected on the preview bus. You
can connect this output to televisions and computer monitors with HDMI connections.
Multi View SDI Output
This SDI output is always high definition and includes 8 video input views, as well as preview and program
views. Tally is included with red for sources on air, and green for sources selected on the preview bus. You
can connect this output to televisions and professional monitors with SDI connections.
Auxiliary SDI Outputs
The ATEM 1 M/E and 2 M/E production switchers have auxiliary outputs that match the video standard and
switch between SD and HD. They can be routed from all internal and external video feeds. You can select
these outputs to be program feeds if you need more program outputs from your ATEM, or you can select
other sources such as clean feeds that include program video, without down stream keying, or even specific
video inputs. Aux. outputs are perfect for driving video screens on stage, or other feeds in venues where you
can independently control what these viewers see. Aux. outputs switch cleanly and can be used as little cut
only switchers independent of the main program outputs. The audio on these outputs is embedded from
the analog audio inputs on the ATEM audio break out cable.
USB 3.0 Output
The USB 3.0 output, available in the ATEM 1 M/E and ATEM 2 M/E Production Switcher can be used to
capture video direct to a Windows PC for real time mastering to file or for waveform monitoring. When
encoding software is used, you can also stream over the internet. ATEM switchers include Media Express
software for recording from this output, as well as Blackmagic UltraScope software for waveform monitoring.
The USB 3.0 output is connected to the Aux. 1 output so you can customize what feed you send to the USB
3.0. This lets you record clean feeds, or other sources based on the needs of your job. The audio on this
output is embedded from the analog audio inputs on the ATEM audio break out cable.
USB 2.0 Output
The ATEM Television Studio has a USB 2.0 output which can be used to capture an H.264 compressed
master file of your program. ATEM switchers include Media Express software for recording from this output.
The audio on this output is embedded from the AES/EBU input.
Preview SDI Output
This output shows the source selected on the preview bus on the switcher, as well as preview transitions.
This output is perfect when you want to use a full resolution preview monitor. The audio on this output is
embedded from the analog audio inputs on the ATEM audio break out cable.